Collision Avoidance and Parking Assist Systems: Service and Repair

REMOVAL




1. Disconnect and isolate the battery negative cable.
2. Lower the headliner (3) in the rear of the vehicle in the liftgate opening. Follow the headliner removal procedure for the rear of the headliner.
3. Bend the retaining tabs (2) upwards to allow the park assist display (1) to drop out of the headliner (3) opening.
4. Disconnect the display electrical connector (4) and remove display (1) from vehicle.

INSTALLATION




1. Position the Park Assist Display (1) in headliner (3) opening and connect the display electrical connector (4).
2. Bend the retaining tabs (2) down behind the headliner (3).
3. Raise the headliner in the rear of the vehicle in the liftgate opening.
4. Connect the battery negative cable.