Incomplete Power Open - Liftgate Driver Circuit Shorted to Ground

Test 1 - 2:

Test 3 - 6:

SYMPTOM
INCOMPLETE POWER OPEN - LIFTGATE DRIVER CIRCUIT SHORT TO GROUND

WHEN MONITORED
During chime operation on opening cycle.

SET CONDITION
When the module receives an opening command, it momentarily sends 12 volts to the Liftgate Open Driver circuit and then the Liftgate Close Driver circuit. If the module senses more than a half volt drop, it will stop operations and set this code.

POSSIBLE CAUSES
- DTC present
- Liftgate open driver wire short to ground
- Liftgate close driver wire short to ground
- Liftgate open driver circuit short to liftgate close driver circuit
- Liftgate module
- Power liftgate motor
- Power liftgate motor