IPM-64

IPM-64-INTERNAL IPM FAILURE

For a complete wiring diagram refer to Diagrams/Electrical.

- When Monitored:

Continuously.

- Set Condition:

Time to mature is 125 ms.





Diagnostic Test

1. INTERNAL IPM FAILURE

Connect the scan tool to the Data Link Connector.

Turn the ignition on.

With the scan tool, erase DTC's.

Turn the ignition off then turn the ignition on and wait approximately 1 minute.

With the scan tool, read DTC's.

Did this DTC reset?

Yes

- Replace the IPM.
- Perform the BODY VERIFICATION TEST - VER 1. Body Verification Test

No

- Test Complete.