B2318

B2318-WIPER HI/LOW CONTROL CIRCUIT HIGH

For a complete wiring diagram consult Diagrams/Electrical.


- When Monitored:
- With the ignition on.
- Set Condition:
- When the TIPM detects a short/HIGH condition.







Diagnostic Test


1. INTEGRATED POWER MODULE
Turn the ignition off.
Replace the Wiper HI/LOW relay with and known good relay.
With the Scan Tool, clear all TIPM DTC's.
Turn the Wipers ON then OFF.
With the Scan Tool, read the Wiper DTC's.
Does the Scan Tool read: B2318-WIPER HI/LOW CONTROL CIRCUIT HIGH?

Yes


- Replace the Totally Integrated Power Module.
- Perform the BODY VERIFICATION TEST - VER 1. Body Verification Test


No


- Replace the Wiper HI/LOW Relay.
- Perform the BODY VERIFICATION TEST - VER 1. Body Verification Test