C220B

C220B - ABS ACC VALUES NOT CALIBRATED

When Monitored:

- Ignition on.

Set Condition:

- If the Anti-Lock Brake Module detects an internal fault.






ABS ACC VALUES NOT CALIBRATED FAILURE DTC PRESENT

1. Turn the ignition on.

2. With the scan tool, read DTCs.

3. With the scan tool, erase DTCs.

4. Turn the ignition off.

5. Turn the ignition on.

6. With the scan tool, read DTCs.

Does the scan tool display C220B-ABS ACC VALUES NOT CALIBRATED?

- YES:

Replace the Integrated Control Unit in accordance with the Service Information.
Perform ABS VERIFICATION TEST, refer to ABS Verification Test


- NO:

Perform the ABS-INTERMITTENT CONDITION TEST, refer to