Lower Intake Manifold

LOWER INTAKE MANIFOLD





1. Clean all sealing surfaces.
2. Position new gaskets and intake manifold on cylinder head surfaces.
3. Install intake manifold bolts and gradually tighten in sequence shown until a torque of 28 Nm (250 in. lbs.) is obtained.




4. Install fuel rail and injectors as an assembly, Fuel Injector - Installation.
5. Connect fuel supply hose to fuel rail.Service and Repair




6. Connect heater hose to rear lower intake manifold.
7. Connect coolant container hose to the rear lower intake manifold.
8. Connect electrical connectors to fuel injectors and coolant temperature sensor.
9. Install power steering fluid reservoir and bracket.
10. Install upper intake manifold Intake Manifold - Installation.
11. Connect the upper radiator hose to the thermostat housing.
12. Fill the cooling system.