Operation CHARM: Car repair manuals for everyone.
Home >> Chrysler >> 2008 >> 300 V6-3.5L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Timing Components >> Timing Cover >> Service and Repair >> Timing Cover - Installation >> Front Timing Belt Cover

Front Timing Belt Cover







INSTALLATION





1. Exchange the accessory drive belt pulley if necessary. Tighten bolt to 61 Nm (45 ft.lbs.).
2. Install upper front timing belt cover.
3. Install lower timing belt front cover.
4. Tighten the timing cover bolts as follows:
- M6 bolts - 12 Nm (105 in.lbs.)
- M8 bolts - 28 Nm (250 in.lbs.)
- M10 bolts - 54 Nm (40 lbs.ft.)

5. Install power steering pump fasteners. Tighten bolts to 23 Nm (200 lbs. in.).
6. Install crankshaft damperVibration Damper - Installation.
7. Install accessory drive belt tensioner Accessory Drive Belt - Installation. Torque fastener to 28 Nm (250 in. lbs.).
8. Install accessory drive beltAccessory Drive Belt - Installation.
9. Lower vehicle.
10. Connect negative battery cable.
pro multis · About Operation CHARM