Rear Timing Belt Cover

INSTALLATION





1. Clean rear timing belt cover O-ring (1) sealing surfaces and grooves. Lubricate new O-rings with Mopar(R) Dielectric Grease or equivalent to facilitate assembly.
2. Position NEW O-rings on cover (2).




3. Install rear timing belt cover (4). Tighten bolts to the following specified torque:
- M10 (2, 5) - 54 Nm (40 ft. lbs.)
- M8 (1) - 28 Nm (20 ft. lbs.)
- M6 (3) - 12 Nm (105 in. lbs.)

4. Install camshaft sprockets Timing Belt & Sprockets - Installation.
5. Install timing belt Timing Belt & Sprockets - Installation.