Operation CHARM: Car repair manuals for everyone.
Home >> Chrysler >> 2008 >> 300 V6-3.5L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Timing Components >> Timing Cover >> Service and Repair >> Timing Cover - Removal >> Rear Timing Belt Cover

Rear Timing Belt Cover







REMOVAL





NOTE: The rear timing belt cover has O-rings to seal the water pump passages to cylinder block. Do not reuse the O-rings.

1. Perform fuel pressure release procedure. Service and Repair.
2. Disconnect the negative battery cable.
3. Remove timing belt Timing Belt & Sprockets - Removal.
4. Remove camshaft sprockets Timing Belt & Sprockets - Removal.
5. Remove rear timing belt cover bolts (1, 2, 3).
6. Remove the rear cover.
pro multis · About Operation CHARM