Remote Start Antenna - Removal

REMOVAL






WARNING: Wait two minutes for the system reserve capacitor to discharge before servicing any airbag components. Failure to do this may result in serious or fatal injury.

The remote start antenna is located on the passenger side above and to the left of glove box.

1. Disconnect and isolate the battery negative cable.
2. Remove screws from Wireless Ignition Node (WIN), Wireless Ignition Node Receiver - Removal.
3. Remove the coaxial electrical cable connector (1) from WIN (2).





4. Remove center bezel, refer to Instrument Panel Bezel - Removal.

NOTE: During removal of the remote start antenna note the routing location of the coaxial cable.

5. Remove the remote start antenna coaxial cable from mounting clips, if equipped.





6. Remove glove box, Instrument Panel Glove Box - Removal.
7. Remove the screws (1) from remote start antenna module (2) and remove from instrument panel assembly.