Lower

LOWER





1. Check to be certain that the spring nuts (2) are properly installed and in good condition on the quarter inner panel (1). Replace the spring nut if any damage is evident.
2. Position the lower C-pillar trim (5) onto the quarter inner panel with the lower edge sequenced over the rear extension of the rear door sill scuff plate (6).
3. Install and tighten the two screws (4) that secure the lower C-pillar trim to the quarter inner panel. Tighten the screws to 1 Nm (11 in. lbs.).
4. Install and tighten the screw that secures the lower C-pillar trim to the rear shelf panel (3). Tighten the screw to 1 Nm (11 in. lbs.).
5. Reinstall the rear seat back side bolster onto the quarter inner panel.
6. Reinstall the rear seat cushion into the vehicle. Seat Cushion Cover - Installation.