Indicator Lens

INDICATOR LENS

CAUTION: The surface around the heated/cooled cupholder Light Emitting Diode (LED) may have some remaining adhesive residue once the indicator lens has been removed. Do not attempt to use cleaning fluids to remove any remaining adhesive as this may damage other nearby plastic decorative surfaces or the LED itself Heated/Cooled Cupholder - Removal .





1. Remove the paper backing (2) from the new indicator lens (1) to expose the self adhesive.
2. Align the two holes (3) on the back of the indicator lens with the two posts that protrude from the top of the heated/cooled cupholder.





3. With the holes in the indicator lens (1) aligned with the posts on the heated/cooled cupholder (2), install the indicator lens onto the cupholder. Firmly press down on the lens to be sure the adhesive firmly bonds to the cupholder surface.