Heated/Cooled Cupholder

HEATED/COOLED CUPHOLDER





1. Disconnect and isolate the negative battery cable.

NOTE: Take the proper precautions to protect the center floor console from cosmetic damage.

2. Remove the center floor console (5) and place it on a work bench Shifter Housing - Removal.
3. Disengage the locking tab (1) and disconnect the wire harness connector (2) from the heated/cooled cupholder (4).
4. Remove the five screws (3 and 6) that secure the heated/cooled cupholder to the center floor console and remove the cupholder.