Indicator Lens

INDICATOR LENS





1. Carefully pry off the original indicator lens (1) from the heated/cooled cupholder (3) using Trim Stick C-4755 (2) or equivalent.






CAUTION: The surface around the heated/cooled cupholder Light Emitting Diode (LED) may have some remaining adhesive residue once the indicator lens has been removed. Do not attempt to use cleaning fluids to remove any remaining adhesive as this may damage other nearby plastic decorative surfaces or the LED itself.

2. Using a small wooden stick (1) or similar tool, remove any adhesive residue (2) from the heated/cooled cupholder indicator lens mounting surface (3). Push the remaining adhesive into a ball of material (4) that can be easily removed and discarded.