Integrated Control Unit (ICU) - Disassembly

DISASSEMBLY

NOTE: For vehicles equipped with Hill Start Assist (HSA), the ICU must be serviced as an assembly. The HCU and ABM are not serviceable separately.










1. If the mounting bracket (3) needs to be removed from the ICU, remove the single mounting bolt (2), then slide the ICU's mounting pins out of the grommets in the bracket and remove the bracket.





2. Remove the mounting pins from the ICU.










3. If equipped with ABS-only (non-ESP(R) vehicle), remove the three screws (1) attaching the ABM (2) to the HCU.










4. If equipped with ESP(R), remove the four screws (1) attaching the ABM (2) to the HCU.










5. Separate the ABM (1) from the HCU (2).