Flexplate - Installation

INSTALLATION





1. Position the flex plate (1) with backing plate (3) on the crankshaft.
2. Apply Mopar(R) Lock & Seal Adhesive to the eight flex plate bolts (2).
3. Install the flex plate bolts (2). Tighten the bolts to 95 Nm (70 ft. lbs.).
4. Install the transaxle Installation or Installation.

NOTE: The Cam/Crank Variation Relearn procedure must be performed anytime there has been a repair/replacement made to a powertrain system, for example: flywheel, valvetrain, camshaft and/or crankshaft sensors or components Programming and Relearning