Wireless Ignition Node (WIN)

B210E-BATTERY VOLTAGE HIGH







- When Monitored:
With the ignition switch on.

- Set Condition:
The Wireless Ignition Node (WIN) has detected the Fused (B+) input voltage above a calibrated value.





DETERMINING IF DIAGNOSTIC TROUBLE CODE (DTC) IS CURRENT

CAUTION: Diagnose and repair all Powertrain DTCs before continuing.

1. Turn the ignition on.
2. With the scan tool, record and erase the WIN DTCs.
3. Perform 5 ignition cycles, leaving the ignition switch on for a minimum of 90 seconds per cycle.
4. Using the scan tool, read the WIN DTCs.

Does the DTC reset?

Yes

- Replace and program the Wireless Ignition Node.
- Perform the WIN VERIFICATION TEST. Wireless Ignition Node (WIN) Verification Test

No

- Perform the WIN VERIFICATION TEST. Wireless Ignition Node (WIN) Verification Test