Operation CHARM: Car repair manuals for everyone.
Home >> Chrysler >> 2013 >> 200 L4-2.4L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Timing Components >> Variable Valve Timing >> Variable Valve Timing Actuator >> Service and Repair >> Variable Valve Timing Assembly - Installation

Variable Valve Timing Assembly - Installation







INSTALLATION






CAUTION:
Do not use an impact wrench to tighten camshaft sprocket bolts. Damage to the camshaft-to-sprocket locating dowel pin and camshaft phaser may occur.

1. Install phaser (2) assembly on camshaft.

NOTE:
Make sure the dowel is seated in the dowel hole and not in a oil feed hole. The dowel hole is larger than the 4 oil feed holes.

2. Install phaser retaining bolt. Hold camshaft in place with a wrench (1) and tighten bolt to 59 Nm (44 ft. lbs.).

3. Install camshafts Camshaft - Installation.

pro multis · About Operation CHARM