Oil Pressure Switch - Installation

INSTALLATION

Special Tools:











NOTE:
If the oil pressure switch is removed, it must be replaced with a new switch.

CAUTION:
The oil pressure switch has tapered threads, over tightening could crack the engine block.

1. Install the oil pressure switch using oil pressure socket (C-4597) (1) or equivalent. Tighten switch to 8 Nm (71 in. lbs.).

2. Connect the oil pressure switch electrical connector.





3. Position the A/C compressor (1) and install three mounting bolts (2). Tighten bolts to 25 Nm (18 ft. lbs.).

4. Install the accessory drive belt Serpentine Accessory Drive Belt - Installation

5. Install the splash shield to the right side frame rail Splash Shield - Installation

6. Reconnect the negative battery cable.