Differential Seal - Installation

INSTALLATION






NOTE:
Right side shown, left side similar.

1. Clean the transaxle case and apply MOPAR(R) ATF RTV (MS-GF41).

2. Right side only, position the transmission extension assembly (2), install the bolts (1) and tighten to 28 Nm (21 ft. lbs.).

3. Left side only, position the transmission extension assembly (2), install the six bolts (1) and tighten to 34 Nm (25 ft. lbs.).

4. Install axle shaft Half Shaft - Installation.

5. Check transaxle fluid level and adjust as necessary.