Fault or Alarm Indication

When the UNLOCK button on the remote transmitter is pressed, the module/receiver will flash the parking lights to indicate information about the remote keyless entry and anti-theft system.

Normal Condition: If there has not been an intrusion and no fault has been detected, the module/receiver will signal a normal condition when the UNLOCK button is pressed. The parking lights will flash twice for 0.5-second, with a 0.5-second pause between flashes

Fault Indication: If there is a fault in the remote keyless entry and anti4heft system, the module/receiver will signal the fault when the UNLOCK button is pressed. The parking lights will flash twice for 1 second, with a 0.5-secondpause between flashes.

Alarm Indication: If there has been an intrusion since the last time the LOCK button was pressed, the module/ receiver will signal that there has been an intrusion when the UNLOCK button is pressed. The parking lights will flash twice for 0.5-second, and with a 1.5-second pause between flashes.

Alarm and fault information in the module/receiver will be erased the next time the module/receiver enters the armed condition after receiving a LOCK message from the transmitter.