Removal and Installation

Removal Procedure




1. Remove the upper and the lower starter mounting bolts.




2. Remove the starter solenoid nuts to disconnect the electrical cable.
3. Remove the starter assembly.

Installation Procedure




1. Place the starter assembly in position.
2. Install the upper and the lower starter mounting bolts.
Tighten
Tighten the starter mounting bolts to 43 N.m (32 lb.ft).




3. Position the starter electrical wire on the solenoid terminal.
4. Install the starter solenoid nuts.
Tighten
Tighten the starter solenoid nuts to 15 N.m (11 lb.ft).