Driver/Vehicle Information Display: Service and Repair

Electronic Transaxle Range Indicator

1. Remove instrument cluster bezel, then remove instrument cluster mounting screws.
2. Rotate top of cluster outward, then disconnect electrical connect from back of cluster.
3. Remove instrument cluster.
4. Reverse procedure to install.

Mechanical Transaxle Range Indicator

1. Remove lower steering column cover, then the metal knee blocker panel.
2. Disconnect transaxle range indicator cable from shift lever, steering column and steering column receiver.
3. Remove instrument cluster bezel, then the instrument cluster mounting screws.
4. Rotate top of cluster outward, then disconnect wire connector from back of cluster.
5. Remove instrument cluster.
6. Reverse procedure to install.