Door Glass - Suction Cup Marks

NO: 23-50-95 Rev. A

GROUP: Body

DATE: Feb. 2, 1996

SUBJECT:
Suction Cup Marks On Glass

NOTE:
THIS BULLETIN SUPERSEDES TECHNICAL SERVICE BULLETIN 23-50-95, DATED AUG. 4, 1995, WHICH SHOULD BE REMOVED FROM YOUR FILES. THE REVISIONS INCLUDE ADDITIONAL INFORMATION AND ARE HIGHLIGHTED WITH **ASTERISKS**.

MODELS:
1996 (NS) Town & Country/Caravan/Voyager
1996 (GS) Chrysler Voyager (European Market)

DISCUSSION:

Some NS vehicles may have circular shaped marks on the **sliding door or aperture panel middle** glass. These marks are the result of handling the glass while it is hot during the manufacturing process with suction cups. **The marks will be on both the inside and the outside surfaces of the glass. ** Marks are most noticeable during humid/wet conditions.

These marks can be removed by cleaning the glass with "BONAMI" brand cleanser and a moist cloth. Make sure both inside and outside surfaces are thoroughly cleaned. Any cleanser powder residue left behind after cleaning the glass can be removed with a clean dry cloth.

**NOTE:
FOR MOPAR REPLACEMENT GLASS, PRIOR TO INSTALLATION, SPRAY THE INSIDE AND OUTSIDE SURFACES OF THE GLASS WITH GLASS CLEANER. IF SUCTION CUP MARKS ARE VISIBLE, CLEAN BOTH SIDES OF THE GLASS WITH "BONAMI" BRAND CLEANSER PRIOR TO INSTALLING THE GLASS IN THE VEHICLE.**

POLICY: Information Only