B127E

B127E-PTS SENSOR 11 RING TIME TOO SHORT

For a complete wiring diagram refer to Diagrams/Electrical.

- When Monitored:

While the vehicle is in reverse for speeds less than 16 km/h (10 mph).

- Set Condition:

Sensor ring down time exceeds limit (greater than 1450 micro-seconds).





Diagnostic Test

1. CHECK FOR ACTIVE DTC

Turn the ignition on.

Apply the vehicle park brake.

Shift the transmission into Reverse.

With the scan tool, record and erase Park Assist Module DTCs.

Wait 30 seconds.

With the scan tool, read Park Assist Module DTCs.

Is this DTC active?

Yes

- Go To 2

No

- The condition that caused this code to set is not present at this time. Check for an intermittent condition by inspecting the related wiring harness for chafed, pierced, pinched, and partially broken wires. Also inspect the related connectors for broken, bent, pushed out, spread, corroded, or contaminated terminals.
- Perform BODY VERIFICATION TEST - VER 1. Body Verification Test

2. REPLACE THE PARK ASSIST SENSOR N0. 11

View Repair

Repair

- Replace Park Assist Sensor No. 11.
- Perform BODY VERIFICATION TEST - VER 1. Body Verification Test