B222C

B222C-VEHICLE CONFIGURATION NOT PROGRAMMED

For a complete wiring diagram refer to Diagrams/Electrical.

- When Monitored:

Continuously

- Set Condition:

The TIPM is not configured for the vehicle.





Diagnostic Test

1. CHECK FOR ACTIVE DTC

Turn the ignition on.

With the scan tool, read DTCs.

Does the scan tool display this DTC as active?

Yes

- Go To 2

No

- Test complete.

2. ACTIVE TIPM DTC

Cycle the ignition from off to run remaining in run.

With the scan tool, read DTCs.

Does the scan tool display this DTC as active?

Yes

- Go To 3

No

- Test complete.

3. VIN MISMATCH DTC PRESENT

Turn the ignition on.

With the scan tool, read DTCs.

Is DTC: B2206-CURRENT VIN MISSING / MISMATCH also active?

Yes

- Refer to repair procedure for DTC-B2206-CURRENT VIN MISSING / MISMATCH. B2206

No

- Replace the TIPM.
- Perform BODY VERIFICATION TEST - VER 1. Body Verification Test