P0600

P0600-SERIAL COMMUNICATION LINK

For a complete wiring diagram refer to Diagrams/Electrical.


- When Monitored:

With the ignition on.

- Set Condition:

Internal Bus communication failure between processors. One Trip Fault. Three Global Good Trips to Clear.







Always perform the Pre-Diagnostic Troubleshooting procedure before proceeding.


Diagnostic Test


1. PCM

NOTE: Diagnose any CMP or CKP Sensor faults before continuing. Check for intermittent loose CMP or CKP connections.

The Powertrain Control Module is reporting internal errors, view repair to continue.

Repair

- Replace and program the Powertrain Control Module.
- Perform the POWERTRAIN VERIFICATION TEST. Powertrain Verification Test