B1BC7

B1BC7-DEPLOYMENT DATA RECORD FULL

- When Monitored:

With the ignition on. The module's on board diagnostics continuously performs internal circuit tests.

- Set Condition:

This DTC will set if the module identifies an out of range internal circuit.






Diagnostic Test

1. CHECK FOR ACTIVE DTC

Turn the ignition on.

Is the Deployment Data Record Full DTC active?

Yes

- Go To 2

No

- Perform *ORC SYSTEM VERIFICATION TEST - VER 1. Occupant Restraint Controller (ORC) Verification Test

2. REPLACE THE OCCUPANT RESTRAINT CONTROLLER

WARNING: To avoid serious or fatal injury, turn the ignition off, disconnect the battery and wait two minutes before proceeding.

WARNING: If the airbag control module is dropped at any time, it must be replaced. Failure to take the proper precautions can result in accidental airbag deployment and serious or fatal injury.

View repair.

Repair

- Replace the Occupant Restraint Controller.
- Perform *ORC SYSTEM VERIFICATION TEST - VER 1. Occupant Restraint Controller (ORC) Verification Test