Operation CHARM: Car repair manuals for everyone.
Home >> Dodge or Ram Truck >> 2008 >> Nitro 4WD V6-4.0L >> Repair and Diagnosis >> Powertrain Management >> Relays and Modules - Powertrain Management >> Relays and Modules - Computers and Control Systems >> Engine Control Module >> Service and Repair >> Powertrain Control Module - Removal

Powertrain Control Module - Removal







REMOVAL









1. The PCM (Powertrain Control Module) (3-Right Hand Drive), or (3-Left Hand Drive) is located in the engine compartment.
2. Disconnect negative battery cable.
3. Disconnect PCM electrical connectors (5-Right Hand Drive), or (4-Left Hand Drive).
4. Remove PCM mounting screws (4-Right Hand Drive), or (5-Left Hand Drive).
5. Remove PCM (3-Right Hand Drive), or (3-Left Hand Drive) from vehicle.
pro multis · About Operation CHARM