Intake Manifold
INTAKE MANIFOLDUpper Intake Manifold
Tighten bolts to 12 Nm (105 in.lbs.) starting in the center working outward in a cross sequence pattern.
Lower Intake Manifold
Install intake manifold bolts and gradually tighten in sequence shown until a torque of 28 Nm (250 in. lbs.) is obtained.
THROTTLE BODY
CAUTION: The throttle body mounting bolts MUST be torqued to specifications. DO NOT OVER TIGHTEN MOUNTING BOLTS. Over tightening can cause damage to the throttle body, throttle plate, gaskets, bolts and/or the intake manifold. Proper torque of the mounting bolts is critical to normal operation.
- Tighten mounting bolts (as shown) in a mandatory torque criss-cross pattern sequence to 7.5 Nm (65 in. lbs.).