Timing Components: Specifications

Timing Components

Crankshaft Damper

Torque bolts to 40 Nm (30 ft. lbs.), plus an additional 60°.

Timing Cover

Using the seal pilot to align the cover, install the cover to the housing and install the bolts. Tighten the bolts at the 3 and 9 o'clock position finger tight, then in a clockwise direction starting at the 3 o'clock position, torque to 24 Nm (18 Ft lbs).
Snug, but do not torque one bolt at the 3 o'clock and 9 o'clock positions. This center's the seal on the crankshaft.
Tighten the bolts to 24 Nm (18 ft. lbs.) torque in a circular pattern.