P0630
P0630-VIN NOT PROGRAMMED IN PCM
For a complete wiring diagram refer to the Wiring Information Electrical Diagrams.
- When Monitored:
While the key is on.
- Set Condition:
The VIN was not calibrated into the ECM.
Always perform the Pre-Diagnostic Troubleshooting procedure before proceeding. Pre-Diagnostic Troubleshooting Procedure
VIN NOT CALIBRATED INTO ECM
1. Using the scan tool, recalibrate the ECM with the proper VIN.
Did the DTC P0630 reset?
Yes
- Replace the ECM.
- Perform POWERTRAIN VERIFICATION TEST (DIESEL). Powertrain Verification Test
No
- Test Complete.