B2142

B2142-IGNITION OFF DRAW (IOD) FUSE NOT PRESENT

For a complete wiring diagram, refer to the Wiring Information.

- When Monitored:
With the ignition on.

- Set Condition:
Ignition Off Draw (IOD) Fuse not installed





CHECK FOR ACTIVE DTC
1. With the scan tool, read the active DTC.
2. Cycle the ignition switch from off to on, leaving the ignition off for a minimum of 30 seconds.
3. With the scan tool, read the active DTC.

Does the scan tool display this DTC as active?

Yes

- Install the IOD Fuse.
- Perform the BODY VERIFICATION TEST. Body Verification Test.

No

- Test complete.