Operation CHARM: Car repair manuals for everyone.

A/T Overdrive Switch - Removal Procedure

90AMCJEEP06 Models

1989-1990 B2


Subject

Automatic Transmission Overdrive Switch Removal Procedure


Index

TRANSMISSION


Date

August 13, 1990


No.

21-51-90

P-2319 (C21-14-0)
BODY CODE LEGEND

B2 - SUMMIT


DISCUSSION

To prevent damaging the overdrive (OD) transmission selector knob when removing the overdrive switch, the following procedure should be followed:

PROCEDURE

1. Remove the transmission selector knob as outlined in the appropriate service manual.

2. Place the OD switch in the "OFF" position, (the switch button protrudes).

Figure 1:




3. Using a small flat blade screwdriver gently pry the button loose as shown in Figure 1.

Figure 2:




4. Holding the OD switch plunger in the depressed (ON) position carefully remove the OD switch from the selector knob, Figure 2.
5. To install the switch reverse the procedure.


POLICY: Information only.