Fuel Filler Door Cable - Becomes Disconnected

89AMC/jeep02

Models


1989 B1 Vehicles


Subject


Fuel Filler Door Cable Comes Loose


Index


BODY


Date

January 23, 1989

No.


23-51-89


P-108 (C23-61)



BODY CODE LEGEND

B1 - Summit

SYMPTOM/CONDITION

On some vehicles, built prior to July 4, 1988, the fuel filler door cable may become loose and disengage from the hook.

DIAGNOSIS

This condition may be caused by excess sealant around the hook installation hole at the inner quarter panel.

PARTS REQUIRED

1 Hook, Fuel Filler Door MB02 3245

REPAIR PROCEDURE

1. Disconnect the cable from the hook, as shown.
2. Remove the excess sealant from around the hook installation hole.

NOTE: TAKE CARE NOT TO DAMAGE THE PAINT WHEN REMOVING THE EXCESS SEALER.
3. If required, install a new fuel filler door hook as described on page 23-51 of Volume 1 in the 1989 Colt/Summit Import Service Manual.


POLICY: Reimbursable within the provisions of the warranty.


TIME ALLOWANCE:
Labor Operations No. 23-41-38-90 . . . . . . . . . . . . 0.2 Hrs.


FAILURE CODE: 83 - Connection Loose