Mopar Bond All GEL

MOPAR BOND ALL GEL (PN 4467709)

Mopar Bond All Gel is a rapid curing instant adhesive gel with excellent humidity and weather resistance. The gelled adhesive will not run or drip and will easily bond rubber, plastics, textiles, cloth, and metals.

INSTRUCTIONS FOR USE

1. Thoroughly clean and dry the area(s) to be bonded with Mopar Brake and Carburetor Cleaner (PN 4318037) or equivalent, or use a swab soaked with isopropyl alcohol.

2. Carefully apply Mopar Bond All Gel to one surface. Use only one drop per square inch of surface. Bonding will not take place if too much adhesive is used.

3. Press parts together immediately and apply pressure for 15 seconds, or until bond sets. Mopar Bond All Gel works with humidity. In extremely low humidity conditions, bonding may take slightly longer.
SUGGESTED APPLICATIONS FOR MOPAR BOND ALL GEL
Securing Vinyl Trim

Dashboard Accessories

Repair of Torn Vinyl Upholstery


Attachment of Small Plastic Parts
Rubber Impact Strips

Securing Weather Stripping

Attachment of Plastic Knobs to Steel Shafts
Mopar Bond All Gel will work with the following materials:
Metals

Rubber

Leather

Wood
Plastics

Laminated Plastic

Paper

Textiles
APPLICATIONS NOT RECOMMENDED

Rear View Mirror Buttons

Styrofoam

Polyethylene
Glass Bonding

Foam Rubber

Polypropolene
DO NOT USE IN AREAS EXCEEDING 200~F.