A L L Diagnostic Trouble Codes ( DTC )

• Testing and Inspection
  • Diagnostic Trouble Code Descriptions
    • Code to Test Chart
    • 2 and 3 Digit Codes
    • Detailed Descriptions
  • Manufacturer Code Charts
    • Code to Test Chart
    • Driveability (DR) Tests
      • DR-1A CODE to DR TEST Chart (Checking for Fault Codes)
      • DR-2 Testing Oxygen Sensor Circuit
      • DR-3A
      • DR-4A
      • DR-5A
      • DR-6A
      • DR-7A
      • DR-8A
      • DR-9A
      • DR-10A
      • DR-11A
      • DR-12A
      • DR-13A
      • DR-14A
      • DR-15A
      • DR-16A
      • DR-17A
      • DR-18A
      • DR-19A
      • DR-20A
      • DR-21A
    • Transmission Control System
      • 1 Diagnostics and DRBII Communication Test
      • 2 Conditions Required to Set Fault Codes
      • 3 Fault Code Test
      • 4 Checking Pulse Generator B
      • 5 Checking Shift Control Solenoid Valve A
      • 6 Checking Shift Control Solenoid Valve B
      • 7 Check Pressure Control Solenoid Valve
      • 8 Fail-Safe Fault Code 17 Directory
      • 9 Checking 1ST Gear Synchronization-Fail Safe Item
      • 10 Checking 2ND Gear Synchronization-Fail Safe Item
      • 11 Checking 3RD Gear Synchronization-Fail Safe Item
      • 12 Checking 3RD Gear Synchronization-Road Test
      • 13 Continued-Checking 4TH Gear Synchronization-Fail Safe
      • 14 Checking 4TH Gear Synchronization-Road Test
      • 15 Checking Throttle Position Sensor
      • 16 Checking TPS Adjustment
      • 17 Checking Fluid Temperature Sensor
      • 18 Checking Kickdown Servo Switch
      • 19 Checking Ignition Coil Circuit
      • 20 Checking Accelerator Switch
      • 21 Check Damper Clutch Control Solenoid
      • 22 Testing For Intermittent Fault Codes
  • Verification Tests
    • Repair Verification Test Procedure - Transmission Control System
    • Verification Test DR-VER - Driveability