Ignition Switch - Accessory Circuit Stays ON

NO.:
08-19-92

GROUP:
Electrical

DATE:
Sep.21, 1992



SUBJECT:
Ignition Switch Accessory Circuit Remains Powered When The Key Is In The "Off" or "Lock" Position



MODELS:

1993 (LH) Intrepid/Vision/Concorde


SYMPTOM/CONDITION:

On some vehicles, customers may complain that accessories, such as the radio, wipers, and turn signal lamps still operate when the ignition switch is in the "off" or "lock" position.


DIAGNOSIS:

If the ignition switch circuit (A1-A31) is powered when the ignition switch is in the "off" or "lock" position, proceed with the following repair.


REPAIR PROCEDURE:

This repair involves replacement of the ignition switch.

1. Replace the ignition switch as described on page 8D-17 of the 1993 Concorde, Intrepid, Vision Service Manual, Publication No. 81-270-3140.

2. It will be necessary to remove the foam from around the old switch before removing the screws and to install it on the new switch after replacing the screws.


POLICY:
Information Only.