Code 45 No-Volatile Memory (EEPROM) or A/D Converter System

Code No.45 Non-volatile memory and A/D converter system


This code is output when the A/D converter and non-volatile memory (EEPROM) system in the SDU fails.

Probable cause of trouble

Defective SDU








Caution

1. After the ignition switch has been placed at the LOCK position and the negative (-) terminal of the battery has been disconnected, wait for more than 60 seconds before starting work. Wind a tape around the disconnected (-) terminal for insulation.

2. To unlock the SDU connector, put a flat tip screwdriver on the lock spring (metallic portion) of the lock lever as shown, and press it horizontally toward the inside of the unit. In this case, do not force the lock lever up. Do not put the flat tip screwdriver in the clearance between the lock lever and lock spring (metallic portion).

Since the A/D converter and non-volatile memory (EEPROM) system in the SDU is suspected replace the SDU.