Ignition System: Service and Repair

Removal
To remove follow the steps listed in the image.

Installation
To install reverse the steps listed in the image.




Step A: Spark Plug Cable Installation
1. Install the spark plug cable clamps as shown in the illustration.
2. The numerals on the support and clamp indicate the spark plug cable No.
3. Pay attention to the following items when the spark plug cables are installed.
1. Install the cables securely to avoid possible contact with metal parts.
2. Install the cables neatly, ensuring they are not too tight, loose, twisted or kinked.

*The spark plug cables should each be routed in the directions indicated by the arrows on the rocker cover