Differential Assembly

SERVICE SPECIFICATIONS
Gear Backlash
Conventional Differential:
Standard Value 0-0.076 mm (0-0.0030 inch)
Limit 0.2 mm (0.008 inch)
Drive Gear 0.11-0.16 mm (0.004-0.006 inch)
Limited Slip Differential 0.03-0.09 mm (0.001-0.004 inch)

Drive Pinion Rotation Torque
With Oil Seal:
New Bearing
With Rust-Prevention Oil 1.0-1.3 Nm (9-11 inch lbs.)
New/Reused Bearing
Gear Oil Application 0.5-0.6 Nm (4-5 inch lbs.)
Without Oil Seal:
New Bearing
With Rust-Prevention Oil 0.9-1.2 Nm (8-10 inch lbs.)
New/Reused Bearing
Gear Oil Application 0.4-0.5 Nm (3-4 inch lbs.)

Drive Gear Runout (Limit) 0.05 mm (0.002 inch)