Using the Ignition Switch

AUTOLOCK ENABLE/DISABLE - USING THE IGNITION SWITCH

Another way to turn the autolock feature off/on is by following this series of steps:
1. Close all doors.
2. Confirm that the key is in the OFF position.

3. NOTE: Steps 3 through eight must be carried out within 30 seconds.

Turn the key from OFF to RUN.

4. Press UNLOCK 3 times.
5. Turn the key from RUN to OFF.
6. Press UNLOCK 3 times.
7. Turn the key from OFF to RUN. The enable/disable mode is now ready to accept program changes.
8. Press UNLOCK once to command the vehicle security module to toggle the autolock/relock feature OFF.
9. Press LOCK once to enter the command.
10. Verify that the horn chirps one time. There should only be one chirp indicating that the autolock/relock feature has been disabled. If one chirp is heard followed by a longer sound of the horn, the autolock/relock feature has just been enabled. Return to Step 10.
11. Turn the key to the OFF position to exit the enable/disable mode.