Attachment II - Labor and Parts Information

LABOR ALLOWANCES





For vehicles where the part must be ordered by the dealer upon inspection only:

PARTS REQUIREMENTS / ORDERING INFORMATION

CUSTOMER VEHICLES:

Parts will be shipped to your dealership according to the procedures established for "Low Volume Programs". DO NOT order parts except for dealer stock units (Refer to "Low Volume Programs").

Note:
When the customer calls the Program Assistance Center the correct parts will be automatically sent to the dealer of their choice. This will avoid having the customer return to the dealer if the vehicle fails the inspection. It is estimated that approximately 90% of the affected vehicles will require driveshaft replacement. Unused parts may be returned for credit. (See "Excess Stock Return" below).

STOCK VEHICLES:

Do not demonstrate or deliver affected vehicles that remain in your new vehicle inventory until this safety recall has been completed. First inspect all affected new vehicles to determine parts requirements. Then contact the Program Assistance Center at to order parts. When calling this number identify Safety Recall 08S04 and have the VIN of the dealer(s) stock vehicle to be serviced.





The DOR/COR number for this safety recall is 50395.

Questions regarding parts should be directed to the Program Assistance Center or E-mailed.

DEALER PRICE

For latest prices refer to DOES II.

PARTS RETENTION AND RETURN

Follow the provisions of the Warranty and Policy Manual for "Parts Retention and Return Procedures."

EXCESS STOCK RETURN

Excess stock returned for credit must have been purchased from Ford Customer Service Division in accordance with Policy Procedure Bulletin 4000.