Dual Climate Controlled Seat Module (DCSM)

DUAL CLIMATE CONTROLLED SEAT MODULE (DCSM)

Exploded View

Front Seat Backrest, Manual and Power Recline, Without Fold Flat (Part 1):

Front Seat Backrest, Manual and Power Recline, Without Fold Flat (Part 2):

Front Seat Backrest, Manual Recline With Fold Flat (Part 1):

Front Seat Backrest, Manual Recline With Fold Flat (Part 2):

Seat Cushion With Power Seat Track (Part 1):

Seat Cushion With Power Seat Track (Part 2):

Driver Seat Cushion With Manual Seat Track (Part 1):

Driver Seat Cushion With Manual Seat Track (Part 2):

Passenger Seat Cushion With Manual Seat Track:

Passenger Power Seat Track (Part 1):

Passenger Power Seat Track (Part 2):

Special Tool(s)

Special Tool(s):

Removal and Installation

NOTE:
- The air bag warning indicator illuminates when the restraints control module (RCM) fuse is removed and the ignition switch is ON. This is normal operation and does not indicate a supplemental restraint system (SRS) fault.
- When installing a new dual climate controlled seat module (DCSM), it is necessary to carry out programmable module installation (PMI).
- The SRS must be fully operational and free of faults before releasing the vehicle to the customer.

1. Before removing the DCSM, carry out the appropriate steps in the PMI procedure.
2. Remove the front passenger seat.
3. Remove the DCSM.
- Disconnect the 3 electrical connectors.
- Remove the 2 screws.
- Remove the DCSM.

4. To install, reverse the removal procedure.
5. Install the front passenger seat. Do not prove out the SRS at this time.
6. Carry out the Occupant Classification Sensor (OCS) System Zero Seat Weight Test.
7. Install the DCSM software data. Carry out the appropriate steps in the PMI procedure.