Fuel System - Throttle Cable To Pedal Connector Kit

TSB 09-21-9

11/02/09

NEW SERVICE KIT AVAILABLE FOR ACCELERATOR
CABLE TO PEDAL CONNECTION

FORD:
2007-2008 Escape

MERCURY:
2007-2008 Mariner

ISSUE
Some 2007-2008 Escape and Mariner (excluding Hybrid) may require the accelerator cable to accelerator pedal connection repaired. A new service clip has been released for use, in lieu of replacing the cable and/or pedal assemblies.

ACTION
Follow the Service Procedure steps to correct the condition.

SERVICE PROCEDURE





1. Position clip on top part of pedal. (Figure 1)





2. Snap bottom of clip onto pedal by pushing forward. (Figure 2)

3. Check to make sure clip is completely snapped in place. Move accelerator pedal from idle to wide open throttle and check that surrounding components do not come in contact with the pedal.





Parts Block

WARRANTY STATUS: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage
IMPORTANT: Warranty coverage limits/policies are not altered by a TSB. Warranty coverage limits are determined by the identified causal part.

OPERATION DESCRIPTION TIME

092109A 2007-2008 Escape, 0.2 Hr.
Mariner (Excludes Hybrid):
Install Accelerator Cable
To Pedal Service Kit

DEALER CODING
CONDITION
BASIC PART NO. CODE
9825 33





Disclaimer