15000 MI or 24000 KM

Lubricate
    Control Arm
      If using Special Operating Conditions I.
Check
    Cooling System
      Check the nitrite level of the coolant.
Adjust
    Wheels
      Inspect the wheels and related components for abnormal noise, wear, looseness, or drag.
Inspect
    Vehicle
      Recommended Multi-point Inspection
    Universal Joint, Drive/Propeller Shaft
      Inspect and lubricate (if equipped with zerk fittings). If not using Special Operating Conditions T, I and D. Inspect and lubricate (if equipped with zerk fittings). If using Special Operating Conditions T, I and D, O
    Tie Rod End
      Inspect tie rod ends (lubricate if equipped with Zerk fittings). If not using Special Operating Conditions.
    Steering and Suspension
      Inspect steering linkage, ball joints, suspension, tie-rod ends, driveshaft and U-joints; lubricate if equipped with grease fittings.
    Fluid - A/T
      Inspect automatic transmission fluid level (if equipped with an underhood dipstick).
    Exhaust System
      Inspect exhaust system and heat shields. If not using Special Operating Conditions.
    Drive/Propeller Shaft
    Brakes and Traction Control
      Inspect brake pads, shoes, rotors, drums, brake lines and hoses and parking brake system. Inspect brakes if using Special Operating Conditions I.
    Ball Joint
      Steering Ball Joints
    Ball Joint
      If not using Special Operating Conditions.
    Air Filter Restriction Sensor / Switch
      Inspect air filter restriction gauge (replace air flter as required or when air filter restriction gauge indicates, reset gauge. If using Special Operating Conditions T, D, O or E.
Replace
    Oil Filter, Engine
      Change engine oil every 5,000 miles or 6 months if using Special Operating Conditions T, D, O, E. Change engine oil every 5,000 miles or 6 months or 200 hours of engine operation if using Special Operating Conditions I.
    Engine Oil
      Change engine oil every 5,000 miles or 6 months if using Special Operating Conditions T, D, O, E. Change engine oil every 5,000 miles or 6 months or 200 hours of engine operation if using Special Operating Conditions I.
Rotate
    Tires
      Rotate tires, inspect tires for wear and measure tread depth if using Special Operating Conditions T, I, D, O or E.