Principles of Operation

Anti-Theft

Principles of Operation

NOTE: The perimeter anti-theft system is only available on the MKX. The feature is not available on the Edge.

NOTE: The Smart Junction Box (SJB) is also known as the Generic Electronic Module (GEM).

NOTE: If an unauthorized vehicle entry is through the driver door, the perimeter alarm will not activate for 12 seconds. If an unauthorized vehicle entry is through one of the passenger doors (or hood), the perimeter alarm activates immediately.

The perimeter anti-theft system provides vehicle security through an audible and visual notification if the vehicle doors or the hood is opened without the system being disarmed. The system arms when:

- the doors and the hood are closed.
- the key is in the OFF position.
- the vehicle is electronically locked using the Integrated Keyhead Transmitter (IKT) key, the keyless entry keypad, or the driver door lock control switch (with the driver door open, then closed).

There is a 20-second pre-arm delay after which each door and hood is armed. If a door or the hood is open, the system still arms all the other closures. Only the open door or hood remains disarmed until it is closed. When the open entry point is closed, that entry point enters a 20-second pre-arm delay, then arms.

The hood switch and door ajar switches register as normally closed. The Smart Junction Box (SJB) monitors the status of the hood switch, and the door ajar switches. If these switches indicate an open entry point, the SJB energizes the horn and flasher relays, causing the horn to sound and the turn signal lamps to flash.