Engine Control Module: Service and Repair

Powertrain Control Module (PCM)









Removal

1. NOTE: PCM replacement DOES NOT require new keys or programming of keys.

Retrieve the module configuration. Carry out the module configuration retrieval steps of the Programmable Module Installation (PMI) procedure. Programming and Relearning

2. Disconnect the 3 PCM electrical connectors.

3. Remove the 2 nuts and the PCM.
- Remove the gasket.

Installation

1. Install the gasket and the PCM.

2. Install the 2 PCM nuts.
- Tighten to 5 Nm (44 lb-in).

3. Connect the 3 PCM electrical connectors.

4. Restore the module configuration. Carry out the module configuration restore steps of the Programmable Module Installation (PMI) procedure. Programming and Relearning

5. Reprogram the Passive Anti-Theft System (PATS). Carry out the Parameter Reset procedure. Passive Anti-Theft System (PATS)