Audio Control Module (ACM)

Audio Control Module (ACM)

NOTE: Edge shown, MKX similar.









Removal and Installation

1. NOTE: Module configuration is required when a new ACM (Audio Front Control Module) is being installed. Upload the ACM (Audio Front Control Module) configuration information to the scan tool. For additional information, refer to Programmable Module Installation (PMI) in Information Bus. Programming and Relearning

2. Remove the Front Controls Interface Module (FCIM). Refer to Front Controls Interface Module (FCIM) Front Controls Interface Module (FCIM).

3. Remove the 4 screws and slide the ACM (Audio Front Control Module) out.
- Disconnect the electrical connectors and the antenna cable connectors.


4. To install, reverse the removal procedure.
- Download the configuration information to the ACM (Audio Front Control Module). For additional information, refer to PMI (Programmable Module Installation) in Information Bus. Programming and Relearning