Diagnostic Routine B

Diagnostic Routine B

Diagnostic Overview

The Power Release Seat Does Not Latch to the Floor

Refer to Wiring Diagram Set 120, Power Seats for schematic and connector information. Diagrams By Number

Normal Operation and Fault Conditions

REFER to Seating - Power Release Seating - 2nd Row - Power Release.

Visual Inspection and Diagnostic Pre-Checks

Inspect the seat-to-floor latches on the seat track for damage.

Verify that BJB (Battery Junction Box) fuse 61 (20A) is OK.

To ensure the most accurate service information, portions of this procedure are under development and may not be immediately available at vehicle introduction.